SPECTRAN® NF-XFR (1Hz to 20MHz / 30MHz)**
For the PROFESSIONAL

WORLDWIDE FIRST "MILITARY-STANDARD" SPECTRUM ANALYSER!

The world novelty: Extreme stable Spectrum Analyser with balistic armor protection. The SPECTRAN NF-XFR was designed and engineered for the use in difficulty conditions, e. g. military operations, building sites, mines, navigation and aviation, etc. It offers a powerfull, extrem shock-resistant Outdoor-Laptop and a sensitive Spectrum Analyser in one compact device. With this analyzer you master all challenges. The SPECTRAN NF-XFR is directly ready for use (professional LCS-Analyzer-Software is already installed). Also at pounding rain, extreme temperatures, blowing dust and dirt.

SPECTRAN® NF-XFR

Every colleague will begrudge you about this worldwide
first HighEnd Outdoor Spectrum Analyzer!

SPECTRAN-SERIES FREQUENCY CHART (base units)

SPECTRAN Frequency Chart SPECTRAN® 1010 - For the NOVICE SPECTRAN® HF-XFR - For the PROFESSIONAL SPECTRAN® 1010E - For the NOVICE SPECTRAN® 3010 - For the INTERMEDIATE SPECTRAN® 3020 - For the INTERMEDIATE SPECTRAN® 5010 - For the PROFESSIONAL SPECTRAN® 5030 - For the PROFESSIONAL SPECTRAN® HF-2025E - For the NOVICE SPECTRAN® HF-4040 - For the INTERMEDIATE SPECTRAN® HF-4060 - For the INTERMEDIATE SPECTRAN® HF-6060 V4 - For the PROFESSIONAL SPECTRAN® HF-6080 V4 - For the PROFESSIONAL SPECTRAN® HF-60100 V4 - For the PROFESSIONAL

HIGHLIGHTS INTEGRATED SPECTRUM ANALYSER:

 Frequency range: 1Hz to 20MHz (30MHz)**
Typ. level range: 200nV bis 200mV**
Typ. accuracy: 3%**
65 MSPS
High-impedance SMA-input

HIGHLIGHTS LAPTOP:

 Exclusive Ballistic Armor™ Protection System to meet and exceed real world and military standards MIL-STD-810F
PrimoSeal™ technology with highest Ingress protection rating (IP65)
Processor: Intel Core 2 Duo P8700(2,53GHz,1.066MHz,3MB) with Intel GMA X4500HD and fingerprint-reader
Monitor: 14,1" widescreen WXGA (1280x800) with camera and microphone
Memory: 4096MB (2x2048) 800MHz DDR2 Dual Channel
Hard Disk: 120GB shock absorbence (5400 1/min) drive
Battery: primary 6 cell 54Wh LI-ION
Oparting system: Windows XP Pro SP3 (incl. Windows Vista Business SP1 Media)

OPTIONS (included in delivery):

 Option 005 Multichannel 65MSPS 12Bit DDC Frequencyfilter
Option 008 20MHz frequencyrange

AVAILABLE OPTIONS:

 Option 010 30MHz frequency range
EMC Probe-Set (EMC Sniffer) with opt. 40dB PreAmplifier
Active Differential Probe (Measure DSL, circuits, mains etc. from DC to 30MHz)
Detailed Calibration Certificate

Included in delivery: NF-XFR Outdoor Spectrum Analyzer, LCS Analysis Software (installed), SMA-tool, battery, battery charger, carrying bag with shoulder belt and detailed english manual.

* Plus shipping
**All stated accuracies, sensitivity and ranges are typical values which may vary depending on the used frequency, settings on the instrument, used antenna and installed options. Unless otherwise stated, these specifications apply for the reference condition: ambient temperature 22±3°C, relative air humidity 40% to 60%, continuous wave signal (CW), RMS detection, all options installed. Accuracy values with preamplifier switched off.
***At the moment the NF-,XFR- and V4-series are available with Beta-Firmware. ALL options are available for those units too. The Beta-Firmware is in continuous development. Some functionality may still be limited and not fully to specifications (Beta status). By regularly checking our homepage for updates, you can always keep your measurement device up-to-date. As soon as version 1.0 of the firmware is released, all functionality and features will be fully available.
***The static sensor (Option 006) can also be "reset to zero" (f.e. with the opt. Zero-Gauss-Chamber), this allows direct measurements of the flux density.


For further information click here
Click here to request more information Military and Outdoor RF & EMF Spectrum-Analyser (1Hz to 9,4GHz)