 |
(1MHz to 9,4GHz)**
For the PROFESSIONAL |
WORLDWIDE FIRST "MILITARY-STANDARD" SPECTRUM ANALYSER!
The World novelty: Extreme stable Spectrum Analyser with balistic armor protection. The SPECTRAN HF-XFR was designed and engineered for use in difficult conditions, e.g. military operations, building sites, mines, navigation and aviation, etc. It offers a powerful, extreme shock-resistant Outdoor-Laptop and a sensitive Spectrum Analyser in one compact device. With this analyser you master all challenges. The SPECTRAN NF-XFR is directly ready for use (professional LCS-Analyser-Software is already installed). Also in pounding rain, extreme temperatures, blowing dust and dirt.
Every colleague will be jealous of you about this worldwide
first HighEnd Outdoor Spectrum Analyser!
SPECTRAN-SERIES FREQUENCY CHART (base units)
HIGHLIGHTS INTEGRATED SPECTRUM ANALYSER:
|
Frequency range: 1MHz to 9,4GHz |
|
Max measurement range: -170dBm (1Hz) |
|
AbsMax Level: +20dBm |
|
AbsMax Level: +40dBm (Option) |
|
Lowest possible SampleTime: 1mS |
|
Typ. accuracy: +/- 1dB** |
|
14Bit Dual-ADC |
|
DDC Hardware-Filter |
|
150 MIPS DSP (CPU) |
|
50 Ohm SMA-input |
HIGHLIGHTS LAPTOP:
|
Exclusive Ballistic Armor™ Protection System to meet and exceed real world and military standards MIL-STD-810F |
|
PrimoSeal™ technology with highest Ingress protection rating (IP65) |
|
Processor: Intel Core 2 Duo P8700(2,53GHz,1.066MHz,3MB) with Intel GMA X4500HD and fingerprint-reader |
|
Monitor: 14,1" widescreen WXGA (1280x800) with camera and microphone |
|
Memory: 4096MB (2x2048) 800MHz DDR2 Dual Channel |
|
Hard Disk: 120GB shock absorbence (5400 1/min) drive |
|
Battery: primary 6 cell 54Wh LI-ION |
|
Oparting system: Windows XP Pro SP3 (incl. Windows Vista Business SP1 Media) |
OPTIONS (included in delivery):
|
Option 020 Highly sensitive internal Pre-Amplifier (15dB) |
|
Option 002 0,5ppm TCXO Timebase |
|
OmniLOG 90200, radial isotropic miniature Broadbandantenna (700MHz - 2,5GHz) |
AVAILABLE OPTIONS:
Included in delivery: HF-XFR Outdoor Spectrum Analyzer, LCS Analysis Software (installed), HyperLOG60100 EMC LogPer Antenna (black) with pistol grip, OmniLOG 90200 miniature Broadbandantenna, 1m SMA-Cable, SMA-tool, battery, battery charger, carrying bag with shoulder belt and detailed english manual.
| * Plus shipping |
| **All stated accuracies, sensitivity and ranges are typical values which may vary depending on the used frequency, settings on the instrument, used antenna and installed options. Unless otherwise stated, these specifications apply for the reference condition: ambient temperature 22±3°C, relative air humidity 40% to 60%, continuous wave signal (CW), RMS detection, all options installed. Accuracy values with preamplifier switched off. |
| ***At the moment the NF-,XFR- and V4-series are available with Beta-Firmware. ALL options are available for those units too. The Beta-Firmware is in continuous development. Some functionality may still be limited and not fully to specifications (Beta status). By regularly checking our homepage for updates, you can always keep your measurement device up-to-date. As soon as version 1.0 of the firmware is released, all functionality and features will be fully available. |
| ***The static sensor (Option 006) can also be "reset to zero" (f.e. with the opt. Zero-Gauss-Chamber), this allows direct measurements of the flux density. |
For further information click here
|
