SPECTRAN® HF-60100 V4 (1MHz to 9,4GHz)***
HandHeld sensitivity WORLD RECORD up to -170dBm (1Hz)!
For the PROFESSIONAL

Our definitive flagship. THE 9.4GHz spectrum analyzer for the "pro" at an incredible price, leaving (almost) nothing to be desired.

Its incredibly high -170dBm sensitivity (1Hz @ 5.555GHz) with preamp sets it worlds apart from even its most current and extremely expensive competitors! But see for yourself.

As an option, a vastly enhanced maximum signal level of up to +40dBm (full ICNIRP) allows measurement of a multitude of signal sources up to 9.4GHz and calculation of ICNIRP limits.

SPECTRAN-SERIES FREQUENCY CHART (base units)

SPECTRAN Frequency Chart SPECTRAN® NF-1010 - For the NOVICE SPECTRAN® HF-XFR - For the PROFESSIONAL SPECTRAN® NF-1010E - For the NOVICE SPECTRAN® NF-3010 - For the INTERMEDIATE SPECTRAN® NF-3020 - For the INTERMEDIATE SPECTRAN® NF-5010 - For the PROFESSIONAL SPECTRAN® NF-5030 - For the PROFESSIONAL SPECTRAN® NF-XFR - For the PROFESSIONAL SPECTRAN® HF-2025E - For the NOVICE SPECTRAN® HF-4040 - For the INTERMEDIATE SPECTRAN® HF-4060 - For the INTERMEDIATE SPECTRAN® HF-6060 V4 - For the PROFESSIONAL SPECTRAN® HF-6080 V4 - For the PROFESSIONAL

SPECIFICATIONS

 Up to 100x faster SampleTime as Rev.3
Up to 80dB higher sensitivity as Rev.3
14Bit Dual-ADC
DDC Hardware-Filter
150 MIPS DSP (CPU)
Frequency range: 1MHz to 9,4GHz
Max measurement range: -155dBm (1Hz)
Max measurement range PreAmp: -170dBm (1Hz)
AbsMax Level: +20dBm
AbsMax Level: +40dBm (Option)³
Typ. accuracy: +/- 1dB**

OPTIONS

 Option 001: 1MB Memory expansion
Option 020: Highly sensitive Pre-Amplifier (internal)
Option 002: 0,5ppm TCXO Timebase
Option 205: 10GHz REALTIME broadband Peak Power-Meter
Option 022: 0,5ppm TCXO Timebase
EMC ProbeSet (EMC-Sniffer) with opt. 40dB PreAmplifier
+40dBm level range (Ext. Attenuator)
Detailed calibration certificate

Included in delivery: HF-60100 V4, HyperLOG 60100 measurement antenna with practical handling, 1m SMA-cable, SMA-tools, SPECTRAN Special-battery, battery charger, large aluminum carrycase and detailed english manual.

Also available as Measurement-KIT

* Plus shipping
**All stated accuracies, sensitivity and ranges are typical values which may vary depending on the used frequency, settings on the instrument, used antenna and installed options. Unless otherwise stated, these specifications apply for the reference condition: ambient temperature 22±3°C, relative air humidity 40% to 60%, continuous wave signal (CW), RMS detection, all options installed. Accuracy values with preamplifier switched off.
***At the moment the NF-,XFR- and V4-series are available with Beta-Firmware. ALL options are available for those units too. The Beta-Firmware is in continuous development. Some functionality may still be limited and not fully to specifications (Beta status). By regularly checking our homepage for updates, you can always keep your measurement device up-to-date. As soon as version 1.0 of the firmware is released, all functionality and features will be fully available.
***The static sensor (Option 006) can also be "reset to zero" (f.e. with the opt. Zero-Gauss-Chamber), this allows direct measurements of the flux density.


For further information click here
Click here to request more information Military and Outdoor RF & EMF Spectrum-Analyser (1Hz to 9,4GHz)